Silverline Stand-Up Height Units – S-200 Series

 

The Silverline was developed as lower priced alternative to the Goldline. Although the Silverline is priced significantly lower than the Goldline, we’re able to maintain a high level of quality, very similar to that of the Goldline. We at Fenco Strongly believe the Silverline is a 9 out of 10 VS. the Goldline being a 10 out of 10. The Silverline out performs and outlasts Diebold undercounter and the like. Being well received by the dealers and end-users, the Silverline has quickly grown to account for over 50% of Fenco undercounter.

Most Goldline models are available in our Silverline construction. The Silverline is offered in all the same colors as our Goldline. The lead-time for Silverline is the same as Goldline: 4 weeks or less from receipt of PO unless requested otherwise. You can use most of the same modifications for Silverline as you can on the Goldline series; Lock upgrades, bus conversions, CPU conversions, base height substitutions, custom colors, OEM Branded drawer fronts, etc…

THE ONLY DIFFERENCE BETWEEN THE SILVERLINE AND THE GOLDLINE IS THE EXTERIOR SHELL CONSTRUCTION SPECIFICATIONS AND WIDTH. The shell construction for the Silverline is always 1” wider than the Goldline.  The Silverline uses 20 Gauge on the exterior shell, whereas the Goldline uses 18 Gauge.    On the Silverline shell constructions, we fold and bend the corners to form a nice, clean finish.  We then spot-weld the shell’s corners thoroughly to tie together the exterior shell.  The Goldline cabinet shell construction is TIG Welded with ground corners for a nice flush, smooth, clean, durable finish.  The Goldline goes through an extra production step (TIG Welding) in which we can skip with the Silverline.  So, we pick up a little bit of time in the welding department, a little bit of steel cost on the exterior shell and then pass those savings directly to the customer.

ALL THE MATERIALS AND PARTS INSIDE THE SHELL ARE THE SAME FOR THE GOLDLINE AND SILVERLINE; the separating shelf, slides, drawers, doors, locks, etc. are the SAME for both the Goldline and the Silverline.

BOTH THE GOLDLINE AND SILVERLINE ARE ALL WELDED, ALL STEEL PRODUCT LINES (NO pop rivets holding the shell together and NO plastic drawer bodies).
A photo below shows just how similar the two products look when side by side.

HEIGHT – MOST OF THESE UNITS ARE PROVIDED AT OUR STAND-UP HEIGHT OF 38.5” (INCLUDES A 4”H REMOVABLE BASE). Each base includes leveling legs capable of raising the height by 1”. Different base heights are available by request. For more information on height/bases/leveling legs, please click HERE (link to height information sheet).

LOCKS – YOUR UNIT MAY COME WITH LOCKS INSTALLED. PLEASE READ THE UNIT DESCRIPTION TO IDENTIFY SAME. ANY COMPARTMENT CAN RECEIVE A LOCK. SOME COMPARTMENTS CAN RECEIVE UP TO 3 LOCKS. ANY LOCK CAN BE UPGRADED UPON REQUEST.

COLORS – 25+ color options.

CPU ACCOMMODATIONS

BUS CONVERSIONS – Convert fixed units to mobile units having 2 swivel wheels, 2 fixed wheels, handles and a superior pop-up foot brake.

Below are images and descriptions of our Silverline units.  When you click on an image below, you will open a new window with a PDF drawing of the corresponding model.

 

S-202
Model S-202
S-203
Model S-203
S-204
Model S-204

Model S-202 features a pedestal Unit with 2 Adjustable Shelves behind Locking Cupboard Door; 19″W x 38-1/2″H x 19″D

Model S-203 features a pedestal Unit with Locking Box Drawer, 1 Adjustable Shelf behind Locking Cupboard Door; 19″W x 38-1/2″H x 19″D

Model S-204 features a pedestal Unit with 2 Locking Box Drawers, 1 Adjustable Shelf behind Locking Cupboard Door; 19″W x 38-1/2″H x 19″D

S-205
Model S-205
S-206
Model S-206
S-207
Model S-207

Model S-205 features a pedestal Unit with 2 Locking Box Drawers, 2 Locking Cupboard Doors; 19″W x 38-1/2″H x 19″D

Model S-206 features a pedestal Unit with 1 Locking Box Drawer, 2 Frame Lockers behind 1/4″ Steel Plate Doors equipped with three point locking bolt-work, Group 2 Spyproof Mechanical Combination Locks and Key Locking L-Handles; 19″W x 19″W x 38-1/2″H x 19″D

Model S-207 features a pedestal Unit with 2 Locking Box Drawers, (2) 1/4″ Frame Lockers behind 1/2″ Steel Plate Doors equipped with three point locking bolt-work, Group 2 Spyproof Mechanical Combination Locks and Key Locking L-Handles; 19″W x 38-1/2″H x 19″D

S-210
Model S-210
S-211
Model S-211
S-212
Model S-212

Model S-210 features a pedestal Unit with 1 Locking Box Drawer, 2 Legal Drawers; 19″W x 38-

Model S-211 features a pedestal Unit with 2 Key Locking Box Drawers Over 4 Legal Drawers – 37″W x 38.5″H x 19″D

Model S-212 features a pedestal Unit with 3 Box Drawers (Lock on Top Drawer Only), 1 Legal Drawer; All LEGAL Drawers have high sides for hanging legal file folders (designed to fit Pendaflex hanging legal file folders). 19″W x 38-1/2″H x 19″D

S-213
Model S-213
S-2
Model S-214
S-215
Model S-215

Model S-213 features a Pedestal Unit with 6 Box Drawers Over 2 Legal Drawers (top drawers are locked) – 37″W x 38-1/2″H x 19″D

Model S-214 features a pedestal Unit with 5 Box Drawers (Lock on Top Drawer Only); 19″W x 38-1/2″H x 19″D

Model S-215 features a Douiblewide version of 214 with 2 lcoking box drawer over 8 box drawers. 37″W x 38-1/2″H x 19″D

S-216
Model S-216
S-217
Model S-217
S-218
Model S-218

Model S-216 features a pedestal unit with 3 Box Drawers (Lock on top 2 Drawers Only), Locking Cupboard Door, 1 Adjustable Shelf; 19″W x 38-1/2″H x 19″D

Model S-217 features a pedestal unit with 2 key-locking box drawers over 1 key-locking cupboard door over 1 1/4″ Frame Locker behind a 1/2″ Steel Plate Door equipped with three point locking bolt-work, Group 2 Spyproof Mechanical Combination Lock and Key Locking L-Handle; 19″D x 19″W x 38-1/2″

Model S-218 features a pedestal unit with 1 key-locking box drawer over a P-51 forms holder with three adjustable dividers, over a key-locking cupboard door, over a cpu converted compartment with ventilation and a roll-out CPU shelf; 18″W x 38-1/2″H x 19″D

S-219
Model S-219
S-220
Model S-220
S-222
Model S-222

Model S-219 features a pedestal unit with 1 key-locking box drawer over a P-51 forms holder with three adjustable dividers, over a 1/4″ Frame Locker behind a 1/2″ Steel Plate Door equipped with three point locking bolt-work, Group 2 Spyproof Mechanical Combination Lock and Key Locking L-Handle, over a ventilated CPU compartment with roll-out CPU shelf; 18″W x 38-1/2″H x 19″D

Model S-220 features two Locking Box Drawers Over A Full 1/8″ Locker with a 1/4″ Steel plate door. The locker is equipped with 3 point boltwork, a group 2 mechanical spyproof combination lock, and a keylocking L-handle. With one adjustable shelf – 19″W x 38-1/2″H x 19″D

Model S-222 features a pedestal Unit with 2 Locking Box Drawers, 1/4″ Frame Locker behind 1/2″ Steel plate door. The locker is equipped with 3 point boltwork, a group 2 mechanical spyproof combination lock, and a keylocking L-handle. With one adjustable shelf – 19″W x 38-1/2″H x 19″D

S-222
Model S-222FL
S-225
Model S-225
S-225
Model S-225FL

Model S-222 features a pedestal Unit with 2 Locking Box Drawers, 1/4″ FULL Locker behind 1/2″Steel plate door. The locker is equipped with 3 point boltwork, a group 2 mechanical spyproof combination lock, and a keylocking L-handle. With one adjustable shelf – 19″W x 38-1/2″H x 19″D

Model S-225 is a pedestal Unit with 3 Box Drawers (Locks on Top 2 Drawers Only), 1/4″ Frame Locker behind 1/2″ Steel plate door. The locker is equipped with 3 point boltwork, a group 2 mechanical spyproof combination lock, and a keylocking L-handle. With one adjustable shelf – 19″Wx38-1/2″Hx19″D

Model 225FL is a pedestal Unit with 3 Box Drawers (Locks on Top 2 Drawers Only), 1/4″ FULL Locker behind 1/2″ Steel plate door. The locker is equipped with 3 point boltwork, a group 2 mechanical spyproof combination lock, and a keylocking L-handle. With one adjustable shelf – 19″Wx38-1/2″Hx19″D

S-226
Model S-226
S-229
Model S-229
S-231
Model S-231

Model S-226 is a Corner Pedestal Unit (for return application) with 1 Fixed Shelf; 19″W x 38-1/2″H x 19″D

Model S-229 is a pedestal Unit with 5 Full Width Drawers (Lock on Top Drawer Only); 37″W x 38-1/2″H x 19″D

Model S-231 is a Pedestal Unit with 2 Adjustable Shelves behind Sliding Doors; 37″W x 38-1/2″H x 19″D

S-241
Model S-241
S-251
Model S-251
S-254
Model S-254

Model S-241 is a pedestal Unit with 2 Box Drawers, 1 Adjustable Shelf behind Sliding Doors; 37″W x 38-1/2″H x 19″D

Model S-251 is a Pedestal Unit with 4 Box Drawers, 1 Adjustable Shelf behind Sliding Doors; 37″W x 38-1/2″H x 19″D

Model S-254 is a pedestal Unit with 3 Full Width Drawers (Lock on Top Drawer Only), 1 Full Width Legal Drawer; 37″W x 38-1/2″H x 19″D

 

FENCO’S GUARANTEE:

Just like all Fenco products, we stand 100% behind our craftsmanship and service.  Being a 3rd generation family owned business, you’ll find working with Fenco has a different feel than most other corporations.  We built our business on customer satisfaction and long term relationships.  We do our absolute best to provide you with a quality product, at a reasonable price with a personal touch & high level of customer service.  Our business is our passion.