Silverline Sit-Down Height Units – S-600 Series
The Silverline was developed as lower priced alternative to the Goldline. Although the Silverline is priced significantly lower than the Goldline, we’re able to maintain a high level of quality, very similar to that of the Goldline. We at Fenco Strongly believe the Silverline is a 9 out of 10 VS. the Goldline being a 10 out of 10. The Silverline out performs and outlasts Diebold undercounter and the like. Being well received by the dealers and end-users, the Silverline has quickly grown to account for over 50% of Fenco undercounter.
Most Goldline models are available in our Silverline construction. The Silverline is offered in all the same colors as our Goldline. The lead-time for Silverline is the same as Goldline: 4 weeks or less from receipt of PO unless requested otherwise. You can use most of the same modifications for Silverline as you can on the Goldline series; Lock upgrades, bus conversions, CPU conversions, base height substitutions, custom colors, OEM Branded drawer fronts, etc…
THE ONLY DIFFERENCE BETWEEN THE SILVERLINE AND THE GOLDLINE IS THE EXTERIOR SHELL CONSTRUCTION SPECIFICATIONS AND WIDTH. The shell construction for the Silverline is always 1” wider than the Goldline. The Silverline uses 20 Gauge on the exterior shell, whereas the Goldline uses 18 Gauge. On the Silverline shell constructions, we fold and bend the corners to form a nice, clean finish. We then spot-weld the shell’s corners thoroughly to tie together the exterior shell. The Goldline cabinet shell construction is TIG Welded with ground corners for a nice flush, smooth, clean, durable finish. The Goldline goes through an extra production step (TIG Welding) in which we can skip with the Silverline. So, we pick up a little bit of time in the welding department, a little bit of steel cost on the exterior shell and then pass those savings directly to the customer.
ALL THE MATERIALS AND PARTS INSIDE THE SHELL ARE THE SAME FOR THE GOLDLINE AND SILVERLINE; the separating shelf, slides, drawers, doors, locks, etc. are the SAME for both the Goldline and the Silverline.
BOTH THE GOLDLINE AND SILVERLINE ARE ALL WELDED, ALL STEEL PRODUCT LINES (NO pop rivets holding the shell together and NO plastic drawer bodies).
A photo below shows just how similar the two products look when side by side.
HEIGHT – MOST OF THESE UNITS ARE PROVIDED AT OUR STANDARD LOW BOY HEIGHT OF 27-7/8” (WHICH DOESN’T INCLUDE A REMOVABLE BASE). Each unit includes leveling legs capable of raising the height by 1”. You can add a base to these models to increase the height if desired. For more information on height/bases/leveling legs, please click HERE (LINK TO HEIGHT INFORMATION).
LOCKS – YOUR UNIT MAY COME WITH LOCKS INSTALLED. PLEASE READ THE UNIT DESCRIPTION TO IDENTIFY SAME. ANY COMPARTMENT CAN RECEIVE A LOCK. SOME COMPARTMENTS CAN RECEIVE UP TO 3 LOCKS. ANY LOCK CAN BE UPGRADED UPON REQUEST.
COLORS – 25+ color options.
BUS CONVERSIONS – Convert fixed units to mobile units having 2 swivel wheels, 2 fixed wheels, handles and a superior pop-up foot brake.
A FEW PHOTOS BELOW PROVIDE EXAMPLES OF FENCO’S SILVERLINE 600 SERIES FINISH:
|
|
|
Below are images and descriptions of our Silverline units. When you click on an image below, you will open a new window with a PDF drawing of the corresponding model.
 Model S-602 |
 Model S-603 |
 Model S-604 |
|||
|
● Model S-602 is a Lowboy Pedestal Unit with 1 Adjustable Shelf behind Locking Cupboard Door; 19″W x 27-7/8″H x 19″D |
● Model S-603 is a Lowboy Pedestal Unit with Locking Box Drawer, 1 Adjustable Shelf behind Locking Cupboard Door; 19″W x 27-7/8″H x 19″D |
● Model S-604 is a Lowboy Pedestal Unit with 2 Locking Box Drawers, 1 Adjustable Shelf behind Locking Cupboard Door; 19″W x 27-7/8″H x 19″D |
|||
 Model S-606 |
 Model S-608 |
 Model S-609 |
|||
|
● Model S-606 is a Lowboy Pedestal Unit with 2 Locking Box Drawers, 1 Legal Drawer All LEGAL Drawers have high sides for hanging legal file folders (designed to fit Pendaflex hanging legal file folders). 19″W x 27-7/8″H x 19″D |
● Model S-608 is a Lowboy Pedestal unit with 4 Box Drawers (Lock on Top 2 Drawers Only); 19″W x 27-7/8″H x 19″D |
● Model S-609 is a Lowboy Pedestal Unit with 2 Legal Drawer All LEGAL Drawers have high sides for hanging legal file folders (designed to fit Pendaflex hanging legal file folders). 19″W x 27-7/8″H x 19″D |
|||
 Model S-616 |
 Model S-618 |
 Model S-620 |
|||
|
● Model S-616 is a Lowboy Pedestal Unit with one key-locking box drawer over a P-51 forms holder with three adjustable dividers, over a ventilated CPU compartment with a roll-out CPU shelf; 18″W x 27-7/8″H x 19″D |
● Model S-618 is a Lowboy Pedestal Unit with one key-locking box drawer over a key-locking cupboard door, over a ventilated CPU compartment with a roll-out CPU shelf; 18″W x 27-7/8″H x 19″D |
● Model S-620 is a Lowboy Pedestal Unit with 2 Locking Box Drawers, 1/8″ Thick Full Lcoker behind 1/4″ Steel plate door. The locker is equipped with 3 point boltwork, a group 2 mechanical spyproof combination lock, and a keylocking L-handle. With one adjustable shelf – 19″W x 27-7/8″H x 19″D |
|||
 Model S-622 |
Model S-622FL |
 Model S-631 |
|||
|
● Model S-622 is a Lowboy Pedestal Unit with 2 Locking Box Drawers, Frame Locker behind 1/2″ Steel plate door. The locker is equipped with 3 point boltwork, a group 2 mechanical spyproof combination lock, and a keylocking L-handle. With one adjustable shelf – 19″W x 27-7/8″H x 19″D |
● Model S-622FL is a Lowboy Pedestal Unit with 2 Locking Box Drawers, FULL Locker behind 1/2″Steel plate door. The locker is equipped with 3 point boltwork, a group 2 mechanical spyproof combination lock, and a keylocking L-handle. With one adjustable shelf – 19″W x 27-7/8″H x 19″D |
● Model S-631 is a Pedestal Unit with 2 Adjustable Shelves behind Sliding Doors; 37″W x 27-7/8″H x 19″D |
|||
 Model S-641 |
|||||
|
● Model S-641 is a Lowboy Pedestal Unit with 2 Box Drawers, 1 Adjustable Shelf behind Sliding Doors; 37″W x 27-7/8″H x 19″D |
|||||
FENCO’S GUARANTEE:
Just like all Fenco products, we stand 100% behind our craftsmanship and service. Being a 3rd generation family owned business, you’ll find working with Fenco has a different feel than most other corporations. We built our business on customer satisfaction and long term relationships. We do our absolute best to provide you with a quality product, at a reasonable price with a personal touch & high level of customer service. Our business is our passion.