GOLDLINE MANUFACTURING SPECS
FENCO GOLDLINE Teller Pedestal Specifications
All materials and workmanship shall be of the very highest quality as measured by the standards of the industry. All sheet steel shall be of the best grade of mild steel known as Metallic Furniture Stock American open-heath, free from scale and buckle. Sheets shall be cold rolled and roller leveled, reannealed, pickled and oiled. All gauges specified shall be of U.S. standard.
Pedestal shall be an all welded, full height double wall construction, fabricated from 18 gauge steel. All corners are formed, welded and ground flush to effectuate a rigid, seamless, unibody construction. A full depth separating shelf shall be electro-welded in place between each drawer and door compartment to deny entry between same.
The 200 series base shall be of all-welded construction fabricated from 16 gauge. It shall provide for a 3” deep x 4” high toe-space. Each corner of the base shall have four adjustable levelers to be accessible through the pedestal bottom into the base. The base is designed to be removable in the field.
All drawers consist of the following parts: body, back, outer front, inner front and hardware. The drawer body shall be of 20 gauge steel and shall be formed with two 90 degree bends, thus forming the sides and bottom. The outer front fastening shall be interlocking lips and two metal screws allowing for easy field removability.
Hinged doors shall be of double-wall construction. The outer door panel shall be of 20 gauge steel and sentinels. All mitered corners are acetylene welded and ground smooth. The inner panel of 20 gauge steel shall cover the lock mechanism and include sound deadening material. The door shall be equipped with the institutional hinge, close on a magnetic keeper, and swing left or right. The design shall allow for field swing interchangeability.
Sliding doors shall have the same general specifications as hinged doors. Each sliding door shall be equipped with two ball bearing sheaves and roll on sheave track in the lower guide channel.
- Metal pretreatment: Three stage full submersion Iron Phosphate Wash System with final rinse containing metal sealer.
- Pre-painting treatment: Before actual painting of components, each and all surfaces of the unit shall be thoroughly wiped with a tack cloth to remove any residual contamination.
- Finish Coat: The finish coat of all components shall be a dry powder based industrial coating. The final finish shall consist of one or more coats to establish a dry film thickness of 1.5 mils. The gloss shall be a medium rubbed effect with a 35-45% angular sheen. All components will be oven cured at a temperature of 300 degrees for 15 minutes.
- Color Options: A choice of 20+ standard decorator colors is offered on all casework. In addition, FENCO shall provide custom color matching as a costed option.
FENCO’s standard drawer and door shall be five-disc wafer/tumbler, interchangeable core, paracentric keylocks. Master keying is standard. Three operating keys shall be supplied to each pedestal. Master keys are available at a nominal charge. The core key is available by request and shall allow for the changing of the core without use of tools or any other means. Among other upgrades, as a costed option, FENCO offers a high security lock alternative in the form of BEST LOCK company’s bolt or snap-lock interchangeable core lock series. Same can be applied to any FENCO drawer or door by specifying same on your purchase order. Click here for more locking options.
Coin Locker Design
FENCO offers both a 3” collar design as well as a full locker design. Both shall feature a ¼” steel body with a ½” thick door. The locker door shall provide for three point, live action (up, down and side), bolt work with a full height, hinge side, dead bar. The combination lock shall be a U.I., listed lock with the option to add a keylock (for dual security) to same. The bolt-work shall be thrown by a key-locking locker handle, which may be keyed to or different from, the pedestal’s drawer locks. The combination lock bolt, when thrown, shall interlock into FENCO’s live three-point bolt-work action to act as a fourth point.
All drawers shall be provided with a highly perfected, three-member progressive, all steel bearing, side arm suspension. The suspension shall consist of three distinct members; outer member ball retainer with ball bearings and an inner member. Load rating of suspension not to be less than 155 lbs. Manufactured by Accuride, Inc. Same shall carry a lifetime warranty.
We take great pride in our packaging. We feel we go above and beyond most manufacturers with our freight policy. Please CLICK HERE TO BE DIRECTED TO OUR FREIGHT POLICY.
Retuned merchandise will not be accepted without prior consent. A restocking fee of forty percent (40%) will be charged on all painted products and twenty-five percent on all hardware or unpainted products as long as those products are received back in good condition by FENCO. Custom products cannot be returned. All returns must be authorized by Fenco and acknowledged with an RGA # (returned goods authorization number). Fenco is not responsible or liable in any way for any unauthorized returns.