Fenco Germ Shields:
All sizes built out of 1/4″ polycarbonate (superior in durability to acrylic).
MODEL & DESCRIPTION:
- FSG-24×30 (Fenco Germ Shield, 24”W x 30”H). All ¼” clear polycarbonate construction. Includes one shield with pass-thru (12”Wx3”H) and two legs. Speaking holes not included (can be drilled in the field if needed).
- FSG-17×30 (Fenco Germ Shield, 17”W x 30”H). All ¼” clear polycarbonate construction. Includes one shield with pass-thru (12”Wx3”H) and two legs. Speaking holes not included (can be drilled in the field if needed).
Custom sizes available upon request – Please provide size and quantity for a quote.
ASSEMBLY – Assembly is pretty simple. Peel off film or paper, align the slots on the legs with the slots on the shield and slide into place. Set on counter top for use.
STABILITY – To come up with a temporary & cost-effective solution, we thought it best to make this item without the need to screw/fasten to a counter top. We believe the stability of our shields is adequate for the intended use. However, if someone bumps into this or pushes with significant force, it could tip over. We suggest taping the legs down to the counter top for added stability if you are concerned about the unit tipping over by force/accident (either double-sided tape is added to the bottom of the legs OR single sided tape may be run from counter top over the legs and back to the counter top to maximize stability).
CLEANING -To clean acrylic and plexiglass that has slight blemishes or dirt, start off by clearing away any debris. Then, use a premium micro-fiber cloth with soapy water to clean the entire surface area. After wetting the cloth, be sure to lightly blot the surface, rather than applying pressure as you wipe. Too much pressure can actually result in more scratches. After you have wiped the entire piece of acrylic, use the dry side of the cloth to dry or buff the area. Buffing or polishing the acrylic surface reduces future stains. If there are any remaining streaks, rewet the cloth and dry again.
Choose Carefully: There are a couple of cleaning items that you’ll want to stay away from. In fact, using the wrong cleaning product can completely damage your acrylic displays to the point that they become unusable!
- Do not use paper towels because they will not remove scratches and may even cause them. Stick with micro-fiber type of cloth.
- Avoid ammonia based products, like Windex or other home glass cleaners, because they contain harmful chemicals that will actually damage the surface leaving it cloudy looking. Soapy water is the safest and most effective cleaning solution for acrylic.
ALL FENCO GERM SHIELDS ARE FABRICATED FROM 1/4″ THICK CLEAR ACRYLIC, POLYCARBONATE OR IMPACT RESISTANT ACRYLIC MATERIALS. WE OFFER CUSTOM SIZES UPON REQUEST. STANDARD OFFERINGS BELOW (W & H sizes below may be scant by ¼” to maximize material usage).
